Do you know how to judge the quality Edge Banding For sale? Let’s take a look at it briefly below!
1. Look at the hue and surface roughness of the quality Edge Banding For sale. The color of a good surface is also very important. Whether the color is close to the customized product and gorgeous. If the surface is very rough and there are scratches, the quality will not be much better. This is the surface quality problem. It has nothing to do with the quality of the internal material, mainly the production process of the manufacturer and the production technical skills of the employees. A good quality Edge Banding For sale is: smooth surface, no or little blistering, no or little streaking, moderate gloss, not too glossy or too matte (unless there are special requirements).
2. Look at the flatness of the surface and the bottom surface, and whether the thickness is uniform, otherwise it will lead to the joint between it and the board, the glue line is too conspicuous or the gap between the board and it is too large to affect the overall beauty. Details determine success or failure, and often a small detail problem may bring about an embarrassing situation where the overall effect is not good.

3. Whether the edge banding and trimming is whitish, whether the surface of the bending quality Edge Banding For sale is seriously whitish, and whether the trimming background color is close to the surface color of the difficult sheet. PVCquality Edge Banding For sale is mainly made of PVC and calcium carbonate plus additives. If the calcium carbonate content is too high, there will be white edge banding, white bending and other phenomena, which proves that the quality of this kind of product is not good. .
4. Whether the strength is OK and whether there is elasticity. High strength means good wear resistance, and the corresponding quality is also better. If the strength is too high, it also means that the processing difficulty is increased. Low elasticity means low wear resistance and low anti-aging ability. In addition, according to the needs of actual production, it is generally necessary to manually trim the edges, so soft points can be appropriately made, and automatic edge banding machines can be appropriately made hard points.
5. Whether the adhesive is evenly applied, and whether it is easy to fall off during use.