How much do you know about the detection methods of Cheapest Edge Banding manufacturers? Let's take a simple look below!

Check Cheapest Edge Banding manufacturers if the surface is smooth and flat, with or without clutter. Spots or fine hair pinholes may be made of recycled PVC. Check that the back is flat. You can use a flat blade to hold Cheapest Edge Banding manufacturers horizontally to see if it is straight, if not, there will be thick glue lines on both sides after the edge is sealed. If the back is flat, and there is still a thick glue line after edge sealing, you can check as follows: Check whether the sawn surface of the board is flat. If the specifications of the upper and lower saw blades are different when sawing the board, there are small steps on the saw surface when sawing the board, which will affect the edge sealing. Check if the hot melt glue is too thick. Check whether the thickness and pressure adjusted by the edge banding machine are coordinated. Use a small section of Cheapest Edge Banding manufacturers to seal the edge, and then tear it apart with force to check whether the adhesive strength of Cheapest Edge Banding manufacturers and hot melt is reasonable and uniform.